Modal analysis of three-dimensional finite element models of reinforced concrete structures
Репозиторий БНТУ
Информация об архиве | Просмотр оригинала| Поле | Значение | |
| Заглавие |
Modal analysis of three-dimensional finite element models of reinforced concrete structures
Модальный анализ пространственных конечно-элементных моделей железобетонных конструкций |
|
| Автор |
Basakou, S. V.
Liashkevich, O. N. |
|
| Описание |
In this article modal analysis of reinforced concrete structures by the Finite Element Method is reviewed. A list of simplifications – implemented within idealization of the structural scheme at the calculation phase – that reduce the reliability of the results is provided. Out of the necessity to use idealizations, the Finite Element Method allows for the possibility of creating multiple alternative computational models for each structural model respectively, and there are many alternative calculation results. Consequently, the calculation of reinforced concrete structures always leads to more than a single result. Idealization of geometric shape has the greatest influence on the variability of results. Accordingly, the need to use solid finite elements in calculations of reinforced concrete structures including rod and slab elements becomes apparent. This will provide means to abandon the subjective construction of the design model of the structure. In addition to traditional calculations of the stress-strain state from the action of static load for a number of structures, a modal analysis should be performed (dynamic calculation). Its purpose is to determine the shapes and free oscillation frequencies in order to determine the correctness of the structural scheme by the first shapes and compare the values of natural frequencies with the regulatory requirements. Since the significant need for computational resources poses a natural limitation of the use of solid finite element models for modal analysis, the effectiveness of this method of calculation should be established. The article showed the effect of applying the idealization of the geometric shape on the results of the modal analysis by comparing two calculations of the FEM of one structure and concluded that solid finite elements should be used for the calculation of reinforced concrete frame structures.
|
|
| Дата |
2019-10-30T09:02:37Z
2019-10-30T09:02:37Z 2018 |
|
| Тип |
Article
|
|
| Идентификатор |
Basakou, S. V. Modal analysis of three-dimensional finite element models of reinforced concrete structures = Модальный анализ пространственных конечно-элементных моделей железобетонных конструкций / S. V. Basakou, O. N. Liashkevich // Проблемы современного бетона и железобетона : сборник научных трудов / Министерство архитектуры и строительства Республики Беларусь, РУП "Институт БелНИИС". – Минск : Колорград, 2018. - Вып. 10. – С. 11-18.
https://rep.bntu.by/handle/data/58448 |
|
| Язык |
en
|
|
| Охват |
Минск
|
|
| Издатель |
Колорград
|
|