Development of Technology for Obtaining Electrodes Based on Copper Wire Used in the Manufacture of Solar Modules
Электронный научный архив УРФУ
Информация об архиве | Просмотр оригинала| Поле | Значение | |
| Заглавие |
Development of Technology for Obtaining Electrodes Based on Copper Wire Used in the Manufacture of Solar Modules
|
|
| Автор |
Illarionova, M. S.
Ivanova, K. Yu. Kuzmin, M. V. Patianova, A. O. Semenov, V. L. |
|
| Тематика |
SMART WIRE CONNECTION TECHNOLOGY
POIN-52 BRAND TIN-INDIUM ALLOY COPPER WIRE MECHANICAL AND ELECTRICAL PARAMETERS SOLAR MODULE |
|
| Описание |
Received: 09.11.2021. Revised: 01.12.2021. Accepted: 28.03.2022. Available online: 31.03.2022.
This paper belongs to the MOSM2021 Special Issue. To optimize the technological process of manufacturing copper wire coated with solder of the POIN-52 brand, the optimal modes for the tinning temperature, linear velocity, diameter of the diamond die and flux were identified. It was found that the best wire tinning process is achieved when cleaning the surface of a copper wire by the method of electrochemical degreasing. The results of the tests showed that, in terms of mechanical and electrical parameters wire meets the requirements for electrodes in the manufacture of solar modules. The results of climatic tests of solar modules showed a high degree of reliability with a power loss of 0.86% and thermal cycling tests with a power loss of 0.4%, which is within tolerance. The research was carried out by Chuvash state University within the implementation of a comprehensive project under the contract No. 2019/0837/1202–19 dated September 19, 2019 with the financial support of the Ministry of Education and Science of Russia under the Agreement No. 075-11-2019-047 dated November 25, 2019 and Russian Foundation for Basic Research (RFBR), project No. 20-33-90269. |
|
| Дата |
2022-08-23T09:45:33Z
2022-08-23T09:45:33Z 2022-07 |
|
| Тип |
Article
Journal article (info:eu-repo/semantics/article) Published version (info:eu-repo/semantics/publishedVersion) |
|
| Идентификатор |
Development of Technology for Obtaining Electrodes Based on Copper Wire Used in the Manufacture of Solar Modules / M. S. Illarionova, K. Yu. Ivanova, M. V. Kuzmin, A. O. Patianova, V. L. Semenov // Chimica Techno Acta. — 2022. — Vol. 9, Supplement: MOSM 2021 Special Issue. — No. 202292S1.
2411-1414 http://elar.urfu.ru/handle/10995/116456 https://www.elibrary.ru/item.asp?id=49334074 10.15826/chimtech.2022.9.2.S1 |
|
| Язык |
en
|
|
| Связанные ресурсы |
Chimica Techno Acta. 2022. Vol. 9. Supplement
|
|
| Формат |
application/pdf
|
|
| Издатель |
Ural Federal University
Уральский федеральный университет |
|