Production of Hybrid Nanocomposites Based on Iron Waste Reinforced with Niobium Carbide/Granite Nanoparticles with Outstanding Strength and Wear Resistance for Use in Industrial Applications
Электронный научный архив УРФУ
Информация об архиве | Просмотр оригинала| Поле | Значение | |
| Заглавие |
Production of Hybrid Nanocomposites Based on Iron Waste Reinforced with Niobium Carbide/Granite Nanoparticles with Outstanding Strength and Wear Resistance for Use in Industrial Applications
|
|
| Автор |
Issa, S. A. M.
Almutairi, A. M. Albalawi, K. Dakhilallah, O. K. Zakaly, H. M. H. Ene, A. Abulyazied, D. E. Ahmed, S. M. Youness, R. A. Taha, M. A. |
|
| Тематика |
CTE
INDUSTRIAL APPLICATIONS IRON RECYCLING WASTE MATERIALS STRENGTH WEAR RESISTANCE |
|
| Описание |
The main objective of this work is to recycle unwanted industrial waste in order to produce innovative nanocomposites with improved mechanical, tribological, and thermal properties for use in various industrial purposes. In this context, powder metallurgy (PM) technique was used to fabricate iron (Fe)/copper (Cu)/niobium carbide (NbC)/granite nanocomposites having outstanding mechanical, wear and thermal properties. Transmission electron microscopy (TEM) and X-ray diffraction (XRD) examinations were used to investigate the particle size, crystal size, and phase composition of the milled samples. Additionally, it was investigated how different volume percentages of the NbC and granite affected the sintered specimens in terms of density, microstructure, mechanical and wear properties, and coefficient of thermal expansion (CTE). According to the findings, the milled powders included particles that were around 55 nm in size and clearly contained agglomerates. The results showed that the addition of 4 vol.% NbC and 8 vol.% granite nanoparticles caused a reduction in the Fe–Cu alloy matrix particle sizes up to 47.8 nm and served as a barrier to the migration of dislocations. In addition, the successive increase in the hybrid concentrations led to a significant decrease in the crystal size of the samples prepared as follows: 29.73, 27.58, 22.69, 19.95 and 15.8 nm. Furthermore, compared with the base Fe–Cu alloy, the nanocomposite having 12 vol.% of hybrid reinforcement demonstrated a significant improvement in the microhardness, ultimate strength, Young’s modulus, longitudinal modulus, shear modulus, bulk modulus, CTE and wear rate by 94.3, 96.4, 61.1, 78.2, 57.1, 73.6, 25.6 and 61.9%, respectively. This indicates that both NbC and granite can actually act as excellent reinforcements in the Fe alloy. © 2023 by the authors.
University of Tabuk: S-0010-1443 The authors extend their appreciation to the Deanship of Scientific Research at the University of Tabuk for funding this work through Research no. S-0010-1443. |
|
| Дата |
2024-04-05T16:15:09Z
2024-04-05T16:15:09Z 2023 |
|
| Тип |
Article
Journal article (info:eu-repo/semantics/article) |info:eu-repo/semantics/publishedVersion |
|
| Идентификатор |
Issa, SAM, Almutairi, AM, Albalawi, K, Dakhilallah, OK, Zakaly, HMH, Ene, A, Abulyazied, DE, Ahmed, SM, Youness, RA & Taha, MA 2023, 'Production of Hybrid Nanocomposites Based on Iron Waste Reinforced with Niobium Carbide/Granite Nanoparticles with Outstanding Strength and Wear Resistance for Use in Industrial Applications', Nanomaterials, Том. 13, № 3, 537. https://doi.org/10.3390/nano13030537
Issa, S. A. M., Almutairi, A. M., Albalawi, K., Dakhilallah, O. K., Zakaly, H. M. H., Ene, A., Abulyazied, D. E., Ahmed, S. M., Youness, R. A., & Taha, M. A. (2023). Production of Hybrid Nanocomposites Based on Iron Waste Reinforced with Niobium Carbide/Granite Nanoparticles with Outstanding Strength and Wear Resistance for Use in Industrial Applications. Nanomaterials, 13(3), [537]. https://doi.org/10.3390/nano13030537 2079-4991 Final All Open Access, Gold, Green https://www.scopus.com/inward/record.uri?eid=2-s2.0-85147708522&doi=10.3390%2fnano13030537&partnerID=40&md5=7ff54a84f220aa7e1705d45e5380d64c https://www.mdpi.com/2079-4991/13/3/537/pdf?version=1675779890 http://elar.urfu.ru/handle/10995/130183 10.3390/nano13030537 85147708522 000930314800001 |
|
| Язык |
en
|
|
| Права |
Open access (info:eu-repo/semantics/openAccess)
cc-by https://creativecommons.org/licenses/by/4.0/ |
|
| Формат |
application/pdf
|
|
| Издатель |
MDPI
|
|
| Источник |
Nanomaterials
Nanomaterials |
|