Exploring the mechanical, tribological, and morphological characteristics of areca fiber epoxy composites reinforced with various fillers for multifaceted applications
Электронный научный архив УРФУ
Информация об архиве | Просмотр оригинала| Поле | Значение | |
| Заглавие |
Exploring the mechanical, tribological, and morphological characteristics of areca fiber epoxy composites reinforced with various fillers for multifaceted applications
|
|
| Автор |
Miniappan, P. K.
Marimuthu, S. Dharani, Kumar, S. Sharma, S. Kumar, A. Salah, B. Ullah, S. S. |
|
| Тематика |
ARECA FIBERS
EPOXY RESIN FRACTURE MECHANICAL PROPERTIES WEAR BASALT DUCTILE FRACTURE EPOXY RESINS FIBER REINFORCED PLASTICS FILLERS FLY ASH HYBRID COMPOSITES TENSILE STRENGTH TEXTURES TRIBOLOGY WEAR OF MATERIALS WEAR RESISTANCE ARECA FIBER BASALT POWDERS EPOXY FIBER-EPOXY COMPOSITES FIBRE-REINFORCED COMPOSITE MECHANICAL BEHAVIOR MECHANICAL CHARACTERISTICS MORPHOLOGICAL CHARACTERISTIC REINFORCED COMPOSITES TRIBOLOGICAL CHARACTERISTICS FIBERS |
|
| Описание |
This investigation is primarily concerned with the effect of fly ash, basalt powder, and tungsten carbide (WC) on the mechanical, microstructural, and tribological behaviour of areca fiber-reinforced composites. The fillers (5–10 wt. %) were included with the areca fiber epoxy reinforced composites. In comparison to areca fiber composites without fillers, the inclusion of fly ash, basalt powder, and WC increased the tensile strength by 33–48.2 MPa. The tensile strength of an A2 composite containing areca fiber (20 wt. %), epoxy (70 wt. %) and basalt powder (10 wt. %) was measured to be 48.2 MPa. Similarly, filler incorporation enhanced flexural, impact, and Shore D hardness properties by up to 21.25%, 13.18%, and 15.66%, respectively. Furthermore, the hybridization of fillers enhanced the mechanical properties and abrasion resistance of areca fiber reinforced composites. The inclusion of filler increases the load-carrying capability and adhesion, as determined by SEM. The river-like pattern demonstrates that ductile failure was dominated in the A5 [areca fiber (20 wt. %), epoxy (70 wt. %), fly ash (5 wt. %) and basalt powder (5 wt. %)] composites. A4 [areca fiber (20 wt. %), epoxy (70 wt. %), fly ash (5 wt. %) and tungsten carbide (5 wt. %)] composite has a lower wear resistance than all other composites. The hybrid filler-reinforced composite exhibits increased wear resistance as a result of the absence of wear detritus and textured surfaces. Copyright © 2023 Miniappan, Marimuthu, Dharani Kumar, Sharma, Kumar, Salah and Ullah.
King Saud University, KSU: RSP2023R145 This study received funding from King Saud University, Saudi Arabia through researchers supporting project number (RSP2023R145). Additionally, the APCs were funded by the King Saud University, Saudi Arabia through researchers supporting project number (RSP2023R145). |
|
| Дата |
2024-04-05T16:28:20Z
2024-04-05T16:28:20Z 2023 |
|
| Тип |
Article
Journal article (info:eu-repo/semantics/article) |info:eu-repo/semantics/publishedVersion |
|
| Идентификатор |
Miniappan, PK, Marimuthu, S, Dharani Kumar, S, Sharma, S, Kumar, A, Salah, B & Ullah, S 2023, 'Exploring the mechanical, tribological, and morphological characteristics of areca fiber epoxy composites reinforced with various fillers for multifaceted applications', Frontiers in Materials, Том. 10, 1185215. https://doi.org/10.3389/fmats.2023.1185215
Miniappan, P. K., Marimuthu, S., Dharani Kumar, S., Sharma, S., Kumar, A., Salah, B., & Ullah, S. (2023). Exploring the mechanical, tribological, and morphological characteristics of areca fiber epoxy composites reinforced with various fillers for multifaceted applications. Frontiers in Materials, 10, [1185215]. https://doi.org/10.3389/fmats.2023.1185215 2296-8016 Final All Open Access, Gold, Green https://www.scopus.com/inward/record.uri?eid=2-s2.0-85164987332&doi=10.3389%2ffmats.2023.1185215&partnerID=40&md5=c12240c70bc3fb4ed4711c314385ff8f https://www.frontiersin.org/articles/10.3389/fmats.2023.1185215/pdf http://elar.urfu.ru/handle/10995/130645 10.3389/fmats.2023.1185215 85164987332 001028587400001 |
|
| Язык |
en
|
|
| Права |
Open access (info:eu-repo/semantics/openAccess)
cc-by https://creativecommons.org/licenses/by/4.0/ |
|
| Формат |
application/pdf
|
|
| Издатель |
Frontiers Media SA
|
|
| Источник |
Frontiers in Materials
Frontiers in Materials |
|